0
home

Witcoat Industrial Paint

home
Witcoat Industrial  Paint
Witcoat Industrial Paint
Price And Quantity
  • 210
  • Liter/Liters
  • 150.00 - 300.00 INR
Product Specifications
  • Brush
  • Used For Printing
  • Liquid
  • Acrylic
  • Blue
  • Paints, Water Dissolve, Color Pigment
    Product Description
    Witcoat Synthetic Enamel Paint

    DESCRIPTION:  

    Witcoat Synthetic Enamel Paint is a modified alkyd based coatings resistant to Salt water, acids, alkalis and wide range of chemicals.This is free from Lead, Chromate, and Chlorine   & Heavy metals.                                   

    RECOMMENDED:

    As a finishing coat for exterior and interior surface, modified alkyd & Pigment based systems is used for corrosive marine and industrial environment. Suitable for protection of  Pipes  & structural steel in chemical and fertilizer  plants, dock installation, thermal power plants  etc.

    PHYSICAL PROPERTIES:

     Proprieties   specification  NOTE
     FINISH :  Smooth & Semi Glossy to Glossy  
     APPLICATION VISCOSITY@ 300C  20-25 Sec  By B-4 Ford Cup
     SHADE : According to the requirement of the party  Visually
     VOLUME SOLID %   35 %  
     THEORETICAL SPREADING :  7 -10  m2/ltr @ 35-45 microns Dry film thickness
     FLASH  POINT :  Above 30 0C  Abel  Closed Cup
    Drying time @ 300C :Tack free
    Hard Dry
    3-4 hrs.
    O/N
     
     SHELF LIFE :  6  months  Months at 300C

    APPLICATION DETAILS:


    Application Method

    Air Spray Brush

    Recommended Thinner

    Witcoat G.P. Thinner 

    Film Thickness

    Dry: 35-45 microns (By Dft-Meter)

    SURFACE PREPARATION:

    Remove oil grease with suitable detergent solution; and other contaminants by high pressure fresh water hosing. Dust off residue. 

    APPLICATION CONDITIONS:

    Apply only on a dry and clean surface, with a temperature above the dew point to avoid condensation.

    SAFETY: 

    As a general rule, inhalation of solvent vapour or paint mist and contact of liquid paint with skin and eyes should be avoided. Forced  ventilation should be provided when working with solvent borne coating in confined spaces or stagnant air. Even when ventilation is provided respiratory skin & eyes protection are always recommended when spraying.  In addition, national local safety regulations should   be followed.    

     DISCLAIMER:

    The information contained within this data sheet is based on information believed to be reliable at the time of its preparation. The company will not be liable for loss or damage howsoever caused including liability for  negligence, Which may be suffered by the user of the data contained herein. It is the user's responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use. No guarantee of results is implied since condition of use is beyond our control.

     Minimum Order Quantity : 210 Ltrs.

    Trade Information
    • Letter of Credit at Sight (Sight L/C), Letter of Credit (L/C), Cheque
    • 60 Per Month
    • 7 Days
    • Yes
    • Free samples are available
    • All India
      Related Products
      Q.D. Anticorrosive Black Paint







      Send Inquiry
      Chlorinated Rubber Paints







      Send Inquiry
      Automotive Lubricating Oil







      Send Inquiry
      Synthetic Enamel Paint


      Send Inquiry
      Two Pack Epoxy Paint


      Send Inquiry
      Industrial Primers


      Send Inquiry
      right arrow
      left arrow
      Contact Us

      205/206, Kalpataru Plaza, Chincholi Bunder Road, Off. S.V. Road,, Mumbai, Maharashtra, 400064, India
      Phone :+918037401894